Email
Password   Forgotten?
Remember me
Marketplace
Business Directory
Discussion Forums
Home
My profile
Search
Spec-Checker
Industry News
Events Calendar
Jobs & Resumes
Photo Galleries




Home | About us | Advertise with us | Tell an associate | Contact us | Site map | Help 
Search  
DISCUSSION FORUMS : Forkliftaction.communicate
Forum: Technical arena
Discussion:  TOYOTA 5FB20 codes
Number of messages: 86
Page: [1] 2 3 4 5
START MESSAGE:
mark_m
co louth, Ireland
Hi everybody i am new to forkliftaction, would anybody know codes CA . EA on 5fb20. It would be usefull before i dismantle panel to test diodes and transistors.
Mark

Posted 24 Jul 2007 05:30 AM Reply  Report this message
REPLIES: Sort replies by
DAMO
DUBLIN, Ireland

IS THAT AN FBM TOYOTA ........

Posted 25 Jul 2007 04:28 AM Reply  Report this message
mark_m
co louth, Ireland
no it is5FB20

Posted 26 Jul 2007 02:54 AM Reply  Report this message
DAMO
DUBLIN, Ireland

EA IS PUMP CONTACTOR ABNORMALITY /
CA IS F/R CONTACTOR ABNORMALITY
AS FAR AS I CAN REMEMBER THATS WHAT
THEM CODES MEAN HOPE IT HELPS.

Posted 26 Jul 2007 03:05 AM Reply  Report this message
genjohn
NB, Netherlands

give me your email adress I will send you all code's
Kindly regards

John

Posted 26 Jul 2007 03:56 AM Reply  Report this message
mark_m
co louth, Ireland
thanks genjohn. email.  markm3ateircomdotnet

Posted 26 Jul 2007 12:01 AM Reply  Report this message
mark_m
co louth, Ireland
thanks for replying damo. All contactors ok

Posted 26 Jul 2007 12:27 AM Reply  Report this message
mark_m
co louth, Ireland
got that john . thanks

Posted 27 Jul 2007 08:18 AM Reply  Report this message
vladimir_k
Buenos Aires, Argentina
Hello! Please, send me all code's from Toyota 5FB20.
Also, I need to get wiring diagram for the same forklift.

Thank you. Best Regards!!!

Posted 28 Feb 2008 06:47 AM Reply  Report this message
brian_l
Ohio, United States
I was Wondering If you could Send Me a Copy of the Trouble Codes Also for the Same Model
Thanks Brian

Posted 8 Apr 2008 09:53 PM Reply  Report this message
josejoel_f
Aguascalientes, Mexico

jonh, I am Joel, a have a one Toyota Forklift 5FBE15, The error codes are c0, c9, a7, can you help me? can you send me any information?
Thanks.

-------------------------
JoseJoelflores@hotmail.com

Posted 15 Apr 2008 02:00 AM Reply  Report this message
mok_e
JOHOR, Malaysia
a7 - parking brake application failure warning
c0 - travelling transistor open / short
c9 - travelling contactor / contact point faulty

Posted 21 Apr 2008 03:04 PM Reply  Report this message
johngen
NB, Netherlands

what you need

john

-------------------------
Email harlekein@hotmaildotcom djdotdj@onsmaildotnl

Posted 26 Apr 2008 06:13 PM Reply  Report this message
josejoel_f
Aguascalientes, Mexico

Thank you for your help johngen

Joel Flores

Posted 28 Apr 2008 04:40 AM Reply  Report this message
vavco
Sabinov, Slovakia

Hi John, I would like you to send me a list of error codes as well.Thank you.

-------------------------
e-mail: vladovavrek@gmail.com

Posted 30 Apr 2008 05:49 AM Reply  Report this message
katharyne_w
Walsall, United Kingdom
we have a toyota forklift would you be so kind as to let us know what the fault codes are
Thankyou.

-------------------------
Katharyne

Posted 9 Aug 2008 01:14 AM Reply  Report this message
vavco
Sabinov, Slovakia

In a case of a malfunction of a forklift  (something is wrong and Toyota does not work properly)  , "Toyota's brain" shows via a display with a help of fault (error) code what could be a case of a malfunction.So, there is a list of fault codes in a technical manual that can help technicians to solve the problem.

-------------------------
e-mail: vladovavrek@gmail.com

Posted 9 Aug 2008 01:43 AM Reply  Report this message
DoNguyen
Binh Thanh District, Vietnam


Hi, I am also have  Toyota 5FBE18 with problem as C1

Please have any help to me!

Posted 1 Sep 2008 04:24 PM Reply  Report this message
vavco
Sabinov, Slovakia

Hello,  C1- drive current sensor error. Check the harness of connector first. And there are 2 same sensors- one for drive motor, second one for pump motor.You can swap them , then if original drive sensor is broken, E1 error has to appear. E1- pump current sensor error. If C1 will be again, let me know. Sensors are connected via CN 105 to the CPU board. Drive - pin 6 (+5V), 12( 0V), 14(analog out) .Pump-pin 5(+5V),4 (0V), 13(analog out) . This is what I know from "my" model of Toyota.If it matches to "yours", I have more circuits drawn in my notices. I know where  outputs go from and where they finish.

-------------------------
e-mail: vladovavrek@gmail.com

Posted 1 Sep 2008 05:37 PM Reply  Report this message
DoNguyen
Binh Thanh District, Vietnam

Thanks

Posted 5 Sep 2008 08:22 PM Reply  Report this message
Page: [1] 2 3 4 5


Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.
FORUM GLOSSARY
Click for description.

FORUM
DISCUSSION
MESSAGES
NICKNAME
SIGNATURE

FORUMS
©Forkliftaction.com
Privacy policy
Related links
Site map
About us
Marketplace | Business Directory | Discussion Forums | Spec-Checker | Industry News | Events Calendar | Jobs & Resumes | Photo Galleries
Forkliftaction.com – PO Box 1439, Milton QLD 4064, Australia