Forkliftaction.com

DISCUSSION FORUMS : Forkliftaction.communicate

My forum profile

Printable version

Discussion Forums Home

Forum:

Warehouse storage and handling

Discussion:

How many pallets can you store in 50,000 sq ft?

Number of messages: 5

START MESSAGE:

Solutions
California, United States

I recently was asked to perform a study for a customer to evaluate the storage capacity of a few warehouses he was considering leasing.

The customer was curious to know what types of equipment would let him store more pallets in a 50,000 square foot space with 29 feet to the ceiling.

So I put together an analysis that yielded some interesting results which I published to our website.  I thought this might be of interest to the group.

raymond-forklifts.com/maximize.html

What do you think?  Were you surprised at the result?

-------------------------
http://www.raymondhandlingsolutions.com

Posted 10 Sep 2007 05:00 AM

Report this message

REPLIES:

Sort replies by

InventoryOps
Wisconsin, United States

cough cough SPAM! cough cough SPAM! cough

Yes I was surprised at the result (and your math). I only really looked at the first comparison of a sit down counterbalanced to a stand-up counterbalanced and was surprised at how you got a 46.6% increase in storage just do to that. Since you didn't provide any additional details, I took a quick look at your drawing and it looks like it only shows a 10% increase in racking. So where did all those other pallet positions come from? Does the stand-up raymond have some new technology that allows you to open a porthole to an alternate universe where you can store more stuff?

By the way, just speaking for myself, I don’t mind that you post a message letting us know that you put a little pallet storage converter program on your site, but going through the whole “I recently was asked to perform a study for a customer” stuff just makes you sound like all the other spammers out there. Hence the bit of attitude I'm giving here.

Posted 15 Sep 2007 01:12 AM

Report this message

Solutions
California, United States

Dear InventoryOps:

Due to greater stability and taller masts, the Reach truck is able to raise pallets higher than the standard 3 stage 83-187 mast on a sit down counterbalanced truck.

In my analysis, I was able to show greater storage density by adding extra levels in the racking and narrowing the aisles. (The RAYMOND reach truck can use as little as a 90" aisle, but I used a 102" clear aisle for my analysis).

Thanks for the feed back!

-------------------------
http://www.raymondhandlingsolutions.com

Posted 15 Sep 2007 01:22 PM

Report this message

bill_reimundus
Essex, United Kingdom

Dear Solutions,

It seems that you may be missing a point about maximising warehouse storage space by use of appropriate forklifts and that you may be unaware of the revolution going on with articulated (pivot steer) forklifts. These trucks, like the Bendi, Flexi and Aisle Master, can match any reach truck on lift height, i.e. up to 13 mt, but surpass them on aisle width needs. A Bendi, for example, can work safely in aisles only 1.6 mt wide compared with the typical 2.6 mt needed by any reach trucks and they can be fitted with double deep pantograph attachments.

Unlike VNA (very narrow aisle) trucks they do not need any form of rail or wire guidance and are much faster and more flexible, being able to work outside on rough ground. This means that they are very much cheaper to buy and run than dedicated VNA trucks. Their only limitation until now was that they did not offer man up capability. This has now been rectified by the recent British launch of an articulated man up Bendi.

The point to bear in mind with any warehouse project cost justification is not to consider only the densest storage acheivable but also the pallet productivity of the trucks in terms of pallets moved per hour. In this respect, articulated forklifts, owing to their greater versatility, are usually far more productive than reach and VNA trucks, which cannot work outside, as a rule, and need more space for manoeuvring at aisle ends.

Posted 18 Sep 2007 08:56 PM

Report this message

daryl_j
manchester, United Kingdom

I think what you all fail to take into account is the load at such heights what does the truck derate to for that height I could be wrong but i think flexi bendi and the like can lift a sandwich box oven 6 metres.

Posted 12 Nov 2009 05:52 AM

Report this message

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

FORUM GLOSSARY

Click for description.

FORUM

DISCUSSION

MESSAGES

NICKNAME

SIGNATURE

FORUMS

Discuss: Industry News & Whispers

Discuss: Conferences, trade shows & other events

Discuss: Mechanical Troubleshooting

Discuss: Technical arena. Did you know? Who knows?

Discuss: Machines. Forklifts, stackers, telehandlers, container handlers and reach stackers

Discuss: Business issues

Discuss: Safety, training & legislation

Discuss: Fun at work