Forkliftaction.com

DISCUSSION FORUMS : Forkliftaction.communicate

My forum profile

Printable version

Discussion Forums Home

Forum:

Lifting machines

Discussion:

Still EGV-14 model - AL94 - What does it means?

Number of messages: 3

START MESSAGE:

Zenon
São Paulo, Brazil

Hi there!

Does anyone out there mind to share the error codes manual and such for an EGV-14 model?
I´m strugling with some alarm codes shown in the machine display. The code AL 94 it is one of these, amongst others. The machine owner does not have its manual anymore.
It is being a PITA to find out the meaning of the alarms without any manufacturer´s reference. I´m almost pulling my hair out.... :-)

If anyone out there could share it, please e-mail it to me at zcad at ig dot com dot br

Any input would be greatly appreciated.

Thanks in advance,

Posted 31 Mar 2008 07:08 AM

Report this message

REPLIES:

Sort replies by

andrew_k
England, United Kingdom

Has the controller been changed recently, the manual says there is a missmatch between the hours on the controller and the hours on the trucks hour meter.

You need a laptop or handheld programmer to repair the problem.

Set aux function #1 to on

hope this helps

Posted 1 Apr 2008 07:39 AM

Report this message

niki_r
sofia, Bulgaria

error94:remark:Composite instrument MDI compares its hour counter with the controller's hour counter
causes:When the controller and/or the composite instrument MDI, are replaced, the two hourcounters are compared.
The new component has 0 hours in memory and the hour counter of the other component still has the old data stored.
action:If error code 94 appears after the replacement of the controller, stop the truck to connect the Notebook. You have
only one minute to change the parameters "AUX FUNCTION #1" to "ON", which then transfers the MDI hour counter to the controller, else this hourcounter assumes the operating hours of
the controller.
If error code 94 appears after the replacement of the MDI, wait 1 minute until the controller has transferred its operating hours to the MDI.

Posted 9 Apr 2008 04:00 AM

Report this message

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

FORUM GLOSSARY

Click for description.

FORUM

DISCUSSION

MESSAGES

NICKNAME

SIGNATURE

FORUMS

Discuss: Industry News & Whispers

Discuss: Conferences, trade shows & other events

Discuss: Mechanical Troubleshooting

Discuss: Technical arena. Did you know? Who knows?

Discuss: Machines. Forklifts, stackers, telehandlers, container handlers and reach stackers

Discuss: Business issues

Discuss: Safety, training & legislation

Discuss: Fun at work