 |
STORA ENSO’S HYLTE BRUK MILL USES CASCADE TOWER CLAMPS TO ENSURE DAMAGE-FREE PAPER ROLLS
Thursday, 20 October 2005
Hylte Bruk, SWEDEN -- Stora Enso’s transport managers use Cascade Tower Clamps with Adaptive Force Control (AFC) to ensure the exceptional quality their customers have come to expect. As part of Stora Enso’s sophisticated BasePort transport system, which integrates the Swedish rail system with the North Sea traffic, Stora Enso’s lift trucks use Cascade Tower Clamps with AFC to load Stora Enso Cargo Units (SECUs)—standardized containers suitable for both trains and ships. |
 |
 |
Bolzoni Auramo Intelligent Carton Clamp ETX-G3S establishes a new way to handle white goods
Thursday, 06 October 2005
Incorrect clamping force is one of the main causes of load and/or packaging damage in the white goods industry. Clamping force must be adjusted to suit the requirements of the logistic handling chain. In principle each load and each handling operation would require a specific clamping force setting. This is impossible without an automatic, intelligent clamping force control.
The Bolzoni Auramo solution is the Intelligent Carton & Appliances Clamp ETX-G3S Series which can be installed on almost all models of Bolzoni Auramo carton and appliance parallel clamps…..Read more with photos |
|
 |
CeMAT 2005 – A highlight for the international logistics sector
Thursday, 06 October 2005
At the beginning of August, CeMAT topped 900 exhibitors, and is now entering into the final stages of preparation for October. With about 45% of the show’s exhibitors coming from abroad, CeMAT is the world’s leading marketing and knowledge-sharing platform for intralogistics. The trade fair will be officially opened by the premiere of the German state of Lower Saxony, Mr. Christian Wulff. |
|
 |
TVH to highlight Quick Search; History of Forklifts & Access equipment at CeMAT
Thursday, 06 October 2005
Visit TVH, Hall 15, Stand D25 at CeMAT. Meet your contact person for forklift parts, used forklifts and all other handling equipment and view our new products.
We will demonstrate new, advanced features for TVH Quick Search, our on-line search engine. More truck types including the complete CLARK range, new engine and transmission component tool and complete pallet truck drawings. Read or buy our breakthrough “100 years of Forklift Trucks”, a 200-page hardcover forklift history book with colour illustrations. A wide range of access equipment parts will be on display. More than 100.000 part numbers refer to the most current spare parts, such as joysticks, contactors and level sensors of most popular makes. |
|
 |
SMH LTD. Opens New Warehouse
Thursday, 06 October 2005
In an effort to meet increased customer demand, SMH LTD. has begun operations in their new 38,000 sq. ft. warehouse in Mississauga, Ontario.
The new warehouse located at 1039 Cardiff Blvd., is more than twice the size of the previous location and offers a large inventory of replacement parts for material handling and industrial equipment vehicles. In addition the warehouse offers customer pick-up until 5:00 p.m. EST, same day shipping on orders placed by 4:00 p.m. EST and next day air service availability! |
|
 |
CASCADE’S NEW SINGLE-DOUBLE PALLET HANDLERS
Thursday, 06 October 2005
Best-Selling Product Gets Even Better!
PORTLAND, OR. USA – Cascade Corporation has improved pallet-handling operations with the introduction of a new Single-Double High Visibility attachment. Single-Doubles, consistently one of the most popular attachments in the materials-handling industry, are so named because they claim the ability to handle either a single pallet or two pallets side by side. Double load handling means fewer trips, which in turn doubles productivity and improves operator efficiency. |
|
 |
Bolzoni Auramo open a new manufacturing facility in China
Thursday, 29 September 2005
The Chinese forklift truck market has been posting double digit growth in the last few years and is approaching the European market volume. The potential of the Chinese market has motivated Bolzoni Auramo to invest in China, opening a new subsidiary and a manufacturing plant in the Shanghai area. |
|
| |
Best media release. Also a test, you can stop screaming now.
Thursday, 29 September 2005
This is so so so good. So so good. I can't say anything else about it except to praise it. Please you have to believe me when I say it's so good. Because it is. It's very good. See how good it is. |
|
 |
VNA Warehouse Floor Flatteners – Concrete Grinding Specialists at CeMAT
Thursday, 22 September 2005
Concrete Grinding Limited, specialists in upgrading the floor flatness of narrow racking aisles in new and existing VNA warehouse/storage units, have released the Laser Grinder, a laser-guided concrete grinding machine which grinds aisles to the required flatness, while being clean, quick and non-intrusive. Designed to operate in operational warehouses, floors are upgraded to ensure a safe and efficient VNA facility with little disruption.
Concrete Grinding Limited will be at CeMAT Hall 11, Stand G66
CONTACT US:> Contact Kevin Dare @ Concrete-Grinding
Click here for full article and pictures |
|
 |
NEW FACILITY & CeMAT 2005 ATTRACTS MANY CUSTOMERS
Thursday, 15 September 2005
CeMAT 2005 is an exhibition where Lisman Vorkheftrucks B.V. cannot be missed. As a strategic purchase partner of many renowned OEM's Lisman allows all their contacts to meet and greet in Hannover. On the 125 square meter stand (exhibition hall 11, stand D37) Lisman speaks all languages and provides their customers a warm welcome. |
|
 |
New Transmission Catalog
Thursday, 01 September 2005
The 2005 Remanufactured Transmission Catalog includes pricing for dozens of transmission styles and their torque converters. The contents of rebuild kits and gasket kits appear near each type of transmission. This 60+ page catalog is easy to use, and is available at no charge to repair facilities and material handling dealers only. |
|
 |
Komatsu new AX50/BX50 Series trucks offer Reduced 0peration Cost
Thursday, 01 September 2005
TOKYO, JAPAN, Komatsu Forklift Co., Ltd. has introduced new family of Internal combustion engine trucks ranging from 1ton through 3.5ton capacity that optimize operational capabilities and increase safety and economical performances for various conditions. (Please note that this new series have not been introduced to North American market yet.) |
|
 |
New Transmission Catalog
Thursday, 18 August 2005
The 2005 Remanufactured Transmission Catalog includes pricing for dozens of transmission styles and their torque converters. The contents of rebuild kits and gasket kits appear near each type of transmission. This 60+ page catalog is easy to use, and is available at no charge to repair facilities and material handling dealers only.
|
|
 |
Omega Lift Manufacturing Inc. & Manchester Industries
Thursday, 11 August 2005
Omega Lift Manufacturing Inc. is proud to announce that Manchester Industries has become the exclusive dealer for central Pennsylvania. Manchester Industries has long been known as central Pennsylvania's premier material handling provider. By offering only the finest new and used equipment and warehousing solutions, they have built lasting partnerships with many respected companies both large and small. |
|
 |
New Transmission Catalog
Thursday, 04 August 2005
The 2005 Remanufactured Transmission Catalog includes pricing for dozens of transmission styles and their torque converters. The contents of rebuild kits and gasket kits appear near each type of transmission. This 60+ page catalog is easy to use, and is available at no charge to repair facilities and material handling dealers only. |
|
 |
Currie Management Consultants Announces Release of Service Workbook
Thursday, 21 July 2005
Worcester, MA — July 10, 2005 — Currie Management Consultants has packaged its popular Service Department Management Workshop into a full-length publication. The nearly 200-page book is available online for $49.95 through Amazon, Barnes & Noble, and CMC. |
|
 |
Omega Lift proudly announces Northland Industrial Truck Co. Inc. (NITCO) is new dealer
Thursday, 14 July 2005
Northland Industrial Truck Co. Inc. provides the most complete selection of materials handling equipment available from a single distributor in the Northeastern United States. Representing many of the recognized leaders in the materials handling industry, their newest partnership with Omega Lift Manufacturing Inc. enhances their product line to include the full line of Omega Lift rough terrain forklifts and 4 directional trucks for indoor and outdoor use. |
|
 |
ORLACO: Number One For Forklift Cameras
Thursday, 30 June 2005This is testORLACO Camera Systems are designed for arduous industrial applications and are therefore robust and provide long service life, and have been shown to provide up to 30-40% increase in pallet movements. The ORLACO Camera System can be used in many varied applications, such as on commercial vehicles, public transport vehicles, earthmoving and materials handling equipment.
Orlaco cameras are factory fitted, used and, in many cases, specified exclusively by European forklift OEMs and attachment manufacturers.
Nowadays, every inch of available space in warehouses and storage areas is used to optimal efficiency. When the driver’s vision is limited, one option is to ... |
|
 |
Peter Keogh Forklift Maintenance
Thursday, 30 June 2005
Peter Keogh Forklift Maintenance has released its Forklift Cost Control Database on Microsoft Access platform. At 250 Euro this is an invaluble tool for all financial controllers in making those important capital budget decisions.
Already in use by several large forklift fleet owners, the Database allows the user to set up details about their fleet and to monitor costs in terms of parts, labour, downtime and fault type. In addition individual truck costs can be compared on a yearly and monthly basis. |
|
| |
TOYOTA MATERIAL HANDLING, US, & SYSTEMS MATERIAL HANDLING CO WORK TOGETHER ON PARTS PROGRAM
Thursday, 30 June 2005This is testSystems Material Handling Co. (SMH) and Toyota Material Handling, U.S.A., Inc. (TMHU) are pleased to announce that SMH has been chosen as the single source provider for the STARLIFT all makes competitive parts program. Key benefits of this agreement to TMHU dealers include: improved order fill rates; extended order cut-off times; multiple warehouse shipping locations; online, “real time” parts lookup and ordering system; and access to the industry’s largest inventory of over 1.6 million part numbers.
TMHU will continue to promote their all-makes competitive parts program under the STARLIFT name. The STARLIFT all-makes competitive parts program offered nationwide through 186 ... |
|
|
 GET INVOLVED
If forklifts are your business and you have news, press releases, photos or tender information to publish, we'd love to hear from you.
Use our contact form.
UPCOMING EVENTS
IN THE NEWS
|
